Genuine Leather Phone Case with Card Slots

A cow leather shell wraps the phone from its back edge and curves forward along each side, leaving the top open for the camera to catch light. Behind the leather, a microfiber face presses flat against the device while card slots form their own pocket between the outer skin and the lining. Hotstamping bites the leather from above to leave a recessed mark without surface coating. A person at a desk slides the phone in by its corners and pulls the lower lip to remove it. The grain darkens where the stamp meets the leather under the thumb.

• The flexible cover leaves an open hole at the camera corner so the lens sits uncovered and flush
• Interior card slots slide flat items between the leather face and the microfiber lining without adding a flap
• The microfiber lining covers the inner surface where the phone rests, presenting a soft woven face against the back panel
• Hotstamping presses marks into the leather grain from above, leaving a recessed imprint instead of a raised ink layer
• A buyer at a counter picks up the case by its leather edge and presses the phone down into the frame